Flaschenträger

For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all) hold labware with 18mm I.D. necks or larger Top row has 12 straight pins 10.2cm (4") long to accommodate smaller items Polystyrene tray catches...

This non-corrosive support stand with stainless steel mounting rod provides modern advantages over metal ring stands. Compact polypropylene base has a smooth surface making cleaning easy; measures 21 x 16cm (8¼ x 6¼”) x 4.5cmH (1¾”) Provides excellent stability; can be used to support a variety of types of plasticware and labware 9.4mm (3/8”) diameter x 50cm (19¾”) long...

This versatile, rugged tray with lid is ideal for safely storing small items or holding instruments while autoclaving. Stacks with identical trays and lids to maximize cupboard and shelf storage capacity Shallow depth is useful for holding small vials or bottles in a water bath or on ice Inside corners are rounded for easy cleaning Both tray and lid are polypropylene and...

These lightweight and corrosion-proof polypropylene plastic trays have rounded corners for easy cleaning and smooth, tapered sides for stacking. Ideal for sterilizing instruments, bottles containing agar, deionized water, saline and other reagents, and for safely cleaning glassware in sinks Polypropylene covers are 3.2mm (?") thick with a 25.4mm (1") skirt that fits snugly...

These lightweight and corrosion-proof polypropylene plastic trays have rounded corners for easy cleaning and smooth, tapered sides for stacking. Ideal for sterilizing instruments, bottles containing agar, deionized water, saline and other reagents, and for safely cleaning glassware in sinks Polypropylene covers are 3.2mm (?") thick with a 25.4mm (1") skirt that fits snugly...

These lightweight and corrosion-proof polypropylene plastic trays have rounded corners for easy cleaning and smooth, tapered sides for stacking. Ideal for sterilizing instruments, bottles containing agar, deionized water, saline and other reagents, and for safely cleaning glassware in sinks Polypropylene covers are 3.2mm (?") thick with a 25.4mm (1") skirt that fits snugly...

Sturdy and stable support stand has a rust-proof, polycarbonate plastic base with a 46cmH x 7.9mm dia. (18 x ????") stainless steel support rod secured to the base with two hex nuts. Offset rod mounts to the 20.8cm (8³???") diameter base, leaving area for larger vessels Useful temperature range +135ºC (275ºF) to -135ºC (-211ºF) Autoclave at 121ºC (250?F) Ships unassembled

Excellent for use in severe corrosive conditions, this heavy-duty support stand is made of polypropylene plastic and metal, yet has no exposed metal parts. Measuring 21.5 x 40.5 x 5cmH (8.5 x 16 x 1¾"), the base has a smooth surface for easy cleaning and weighs 2.5kg (5½lbs) for stability 12.5mm dia x 76cmL (½ x 30") rod can be screwed into the center of the base, or at...

Wire formed, epoxy coated holder keeps lead ring weights organized and handy. Small footprint; circular base is only 19cm (7½") in diameter Rings having an inside diameter of 17.8mm (0.7") or larger stack neatly on a tapered center post (17.1cm (6¾") high) Steam autoclavable at 121?C (250?F)

Recyclable trays feature a built in angle to prevent separation of thermometer liquid. Available in 3 or 14 slot versions with numbered slots Made from 2mm polystyrene UV coated

The Lattice Support Stand has an extended base and three, evenly spaced, rigid aluminum support rods to provide maximum capacity of small lightweight items such as glassware, as well as heavy items such as mechanical stirrers. Weighted polypropylene base is excellent for use in severe corrosive conditions; stain resistant; provides maximum stability Three solid aluminum rods...

The Lattice Support Stand has an extended base and three, evenly spaced, rigid aluminum support rods to provide maximum capacity of small lightweight items such as glassware, as well as heavy items such as mechanical stirrers. Weighted polypropylene base is excellent for use in severe corrosive conditions; stain resistant; provides maximum stability Three solid aluminum rods...

This high-density polyethylene rack holds four separatory funnels on the lower shelf or four long-stem funnels on the upper shelf [maximum funnel diameter 98 mm (3?”)]. Set screws allow shelf height adjustments anywhere along the 74 cm (29”) support rods Includes 24 insert clips that allow the rack to accommodate different sized Separatory Funnels and Imhoff Cones...

This high-density polyethylene rack holds four separatory funnels on the lower shelf or four long-stem funnels on the upper shelf [maximum funnel diameter 98 mm (3?”)]. Set screws allow shelf height adjustments anywhere along the 74 cm (29”) support rods Includes 24 insert clips that allow the rack to accommodate different sized Separatory Funnels and Imhoff Cones...

These polypropylene racks hold 25cc, 75cc (50 - 75 ml or 250 - 260 ml) or similar sized tissue culture flasks in a vertical position. Flasks can be easily organized to improve processing and to avoid errors in collecting used media, media change, washing of cell monolayer, trypsinization and seeding of cells. Rectangular holes in the top and center plates stabilize the...

This polypropylene rack holds 143 vacuum-type syringe tubes: 80 tubes 12.7mm (¹/?") O.D. and 63 tubes 16mm (?/?") O.D. up to 102mm (4") long. Tubes are suspended in channels by colored stoppers providing instant visual identification One or two channels may be left open for stacking blood samples in sequential order as they are taken, for later numbering Three large holes...

Protect fragile glass hydrometers by storing them in this 18-place polypropylene rack. Middle and top plates have 25mm (1") diameter holes Bottom plate is 44mm (1¾") high; wells taper from 25mm to 9mm (1 to ?") to hold the hydrometer bulb Base is 21 x 21.6cm (8¼ x 8½") for tip-proof stability Overall height: 25.1cm (9?") with handles Steam autoclavable at 121°C (250°F)

Protect fragile glass hydrometers by storing them in this 18-place polypropylene rack. Middle and top plates have 25mm (1") diameter holes Bottom plate is 44mm (1¾") high; wells taper from 25mm to 9mm (1 to ?") to hold the hydrometer bulb Base is 21 x 21.6cm (8¼ x 8½") for tip-proof stability Overall height: 25.1cm (9?") with handles Steam autoclavable at 121°C (250°F)

Sturdy, stable polypropylene racks are made specifically for organizing and protecting thin-walled Nuclear Magnetic Resonance tubes. Hemispherical wells in lower deck cradle tubes End plate handles make transport easy Racks stack securely to conserve bench space Holds up to 72 tubes in a 6 x 12 array Chemical resistant and autoclavable Dimensions: 21L x 11W x 22cmH (8? x 4½...

These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage. Only the corners of the cuvettes touch the racks Accommodate 12 cuvettes of 10mm light path Will not scratch quartz cuvettes F18516-0787 features Stack Rack™ interlocking end plates for secure stacking Polypropylene; steam autoclavable at 121ºC (250ºF)

Handy rack holds 8 test tubes for storing and conditioning pH and ion electrodes. Holds two rows of 4 tubes up to 20mm in diameter Polypropylene rack resists chemical attack; autoclavable at 121º C (250º F)

This polypropylene rack holds twenty 10mm light path spectrophotometer cuvettes in two tiers with numbered wells. Wells hold standard cuvettes with a 12.5mm cross-section Sloped top makes the second tier more accessible Steam autoclavable at 121ºC (250ºF)

Heavy-duty rack protects your expensive bottles keeping them from rolling, tipping and striking against one another. Holds 150mm and 300mm long bottles with ample space in between to allow for the screw cap diameter and provide convenient handling. Epoxy-coated steel rods provide durability and easy cleaning Steam autoclavable at 121ºC (250ºF) Holes are 42mm square for 40mm...

These racks have 12 places (3 x 4 rows) for 300ml Biological Oxygen Demand Bottles. Stackable for storage or refrigeration allowing 16.7cm (6?/??") between racks Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)