No results were found for the filter!
IKA TS 25-3 - Cleaning tool Cleaning tool in combination with the dispersers T 25 digital, T 25 easy clean digital/control Recommended cleaning process in three steps: 1. Pre-cleaning with suitable solvent 2. Cleaning with detergent 3. Final cleaning and rinsing with demineralized water Scope of delivery: one tube holder, three tubes with caps.
Content 1 Stück
Preis auf Anfrage
Order No.: 2189036
Manufacturer Art. No.: 0020003013
IKA BS.ICC - Bridge, small for ICC, 8/9 l bath vessels Small bridge for ICC Suitable for bath size S
Content 1 Stück
Preis auf Anfrage
Order No.: 2189037
Manufacturer Art. No.: 0020003077
IKA BL.ICC - Bridge, big for ICC, 18/20 l bath vessels Large bridge for ICC Suitable for bath size M + L
Content 1 Stück
Preis auf Anfrage
Order No.: 2189038
Manufacturer Art. No.: 0020003078
IKA MMT 40.1 - Multi-use milling tube, 40 ml Multi-use Milling Tube MMT 40.1 The Multi-use Milling Tube MMT40.1 with a maximum volume of 40 ml can be used and cleaned in a dishwasher multiple times. The package includes a rich set of spare parts so that wearing parts can be replaced if necessary. Therefore it is possible to carry out a number of experiments with the grinding chamber depending on the nature of the...
Content 1 Stück
Preis auf Anfrage
Order No.: 2189039
Manufacturer Art. No.: 0020003165
IKA DT-20 eco - Tube with rotor-stator element, 20 ml, 25 pcs. Low-cost disposable dispersing tube for dispersing, homogenizing and suspending for e.g. tissue samples, food samples, tablets. The tube cannot be used in aggressive solvents. Components: Tube, dispersing device, cover Volume: 5 - 15 ml Application: Dispersion, homogenization, suspensions Further suitable for: Additional media quantities may be added during operation...
Content 1 Stück
Preis auf Anfrage
Order No.: 2189040
Manufacturer Art. No.: 0020003207
IKA DT-50 eco - Tube with rotor-stator element, 50 ml, 10 pcs., membrane lid Low-cost disposable dispersing tube for dispersing, homogenizing and suspending for e.g. tissue samples, food samples, tablets. The tube cannot be used in aggressive solvents. Components: Tube, dispersing device, cover Volume: 15 - 50 ml Application: Dispersion, homogenization, suspensions Material: PP (tube), PEEK (stirring unit) and PSU (rotor-stator-system) Packing unit:...
Content 1 Stück
Preis auf Anfrage
Order No.: 2189041
Manufacturer Art. No.: 0020003213
IKA A-MMT.100 - Abrasion set for MMT 40.1 / MMT 100.1, 100 sealing, 5 beaters, 5 couplings Abrasion set for MMT 40.1 / 100.1 Delivery: 100 x sealing, 10 x beater, 10 x coupling
Content 1 Stück
Preis auf Anfrage
Order No.: 2189043
Manufacturer Art. No.: 0020003378
IKA S 65 KD - G 65 M - Dispersing element, Ø65 mm Dispersing tool for the disperser T 65 basic/digital Type of sealing and bearing: Ball-bearing with PTFE sealing and FFKM O-ring Product-touching material: AISL 316L, PTFE, FFKM Suitable for solvents: Yes Sterilizable: all methods (except ball bearing) Suitable for vacuum: Yes Max. working temperature [°C]: 180 Shaft length [mm]: 520 Diameter stator/rotor [mm]: 65/58 Gap...
Content 1 Stück
Preis auf Anfrage
Order No.: 2188751
Manufacturer Art. No.: 0010000642
IKA S 65 KD - G 65 F - Dispersing element, Ø65 mm Dispersing tool for the disperser T 65 basic/digital Type of sealing and bearing: Ball-bearing with PTFE sealing and FFKM O-ring Product-touching material: AISL 316L, PTFE, FFKM Suitable for solvents: Yes Sterilizable: all methods (except ball bearing) Suitable for vacuum: Yes Max. working temperature [°C]: 180 Shaft length [mm]: 520 Diameter stator/rotor [mm]: 65/58 Gap...
Content 1 Stück
Preis auf Anfrage
Order No.: 2188752
Manufacturer Art. No.: 0010000643
IKA S 50 KG - HH - G 45 G - ST - Dispersing element, Ø45 mm Suitable for dispersing instrument T 50 digital Ultimate fineness, emulsions 10 - 30 µm* Working range: 0,5 - 20 l Stator diameter: 45 mm Immersion depth: 70 - 260 mm Materials in contact with medium: FFPM, SIC, AISI 316L Suitable for solvents: yes Max. temperature: 180 °C Sterilization methods: all methods
Content 1 Stück
Preis auf Anfrage
Order No.: 2188753
Manufacturer Art. No.: 0010000648
IKA S 65 C - G 65 G - Dispersing element, Ø65 mm Dispersing tool for the disperser T 65 basic/digital Type of sealing and bearing: Ball-bearing and ceramic plain bearing Product-touching material: AISL 316L, ceramic Suitable for solvents: Yes Sterilizable: all methods (except ball bearing) Suitable for vacuum: No Max. working temperature [°C]: 180 Shaft length [mm]: 520 Diameter stator/rotor [mm]: 65/53 Gap between [mm]:...
Content 1 Stück
Preis auf Anfrage
Order No.: 2188760
Manufacturer Art. No.: 0010001665
IKA S 65 C - G 65 M - Dispersing element, Ø65 mm Dispersing tool for the disperser T 65 basic/digital Type of sealing and bearing: Ball-bearing and ceramic plain bearing Product-touching material: AISL 316L, ceramic Suitable for solvents: Yes Sterilizable: all methods (except ball bearing) Suitable for vacuum: No Max. working temperature [°C]: 180 Shaft length [mm]: 520 Diameter stator/rotor [mm]: 65/58 Gap between [mm]:...
Content 1 Stück
Preis auf Anfrage
Order No.: 2188761
Manufacturer Art. No.: 0010001666
IKA S 65 C - G 65 F - Dispersing element, Ø65 mm Dispersing tool for the disperser T 65 basic/digital Type of sealing and bearing: Ball-bearing and ceramic plain bearing Product-touching material: AISL 316L, ceramic Suitable for solvents: Yes Sterilizable: all methods (except ball bearing) Suitable for vacuum: No Max. working temperature [°C]: 180 Shaft length [mm]: 520 Diameter stator/rotor [mm]: 65/58 Gap between [mm]:...
Content 1 Stück
Preis auf Anfrage
Order No.: 2188762
Manufacturer Art. No.: 0010001667
IKA CO V 1 - Stopcock for external temperature control, max. 180°C Stopcock for external temperature control, max. 180°C, max. 1 bar Connection: Directly on temperature control instrument, second side for M16x1 hose olives
Content 1 Stück
Preis auf Anfrage
Order No.: 2189007
Manufacturer Art. No.: 0020000249
IKA RV 10.5005 - Hose kit Practical Hose Kit for connection of one Rotary Evaporator with peripheral environment. Kit consists of 5m water supply hose, 3m vacuum supply hose and 4 hose clamps and 4 hose clips for tight and safe connections.
Content 1 Stück
Preis auf Anfrage
Order No.: 2189009
Manufacturer Art. No.: 0020000552
IKA LT 5.25 - Lock coupling set For connection at side of the reactor. Thread: NPT ¼ female. Coupling cross section: DN 9 Material: stainless steel with FFKM seal Working conditions: up to 260°C Note: Please order the coupling counterpart LT 5.26 or LT 5.27 to connect the tempering hoses separately
Content 1 Stück
Preis auf Anfrage
Order No.: 2189010
Manufacturer Art. No.: 0020000878
IKA LT 5.26 - Lock adapter set For connect tempering hoses with M 16x1 screw nut connector. (e.g. LT 5.20 / LT 5.21 / H.FKM.12) Thread: M16x1 male. Coupling cross section: DN 9 Material: stainless steel with FFKM seal Working conditions: up to 260°C Note: Please order the coupling counterpart LT 5.25 on reactor side separately
Content 1 Stück
Preis auf Anfrage
Order No.: 2189011
Manufacturer Art. No.: 0020000879
IKA LT 5.27 - Hose adapter set For Connection of DN 12 tempering hoses- Outer Diameter of the hose barb: 13,5 mm Coupling cross section: DN 9 Material: stainless steel with FFKM seal Working conditions: up to 260°C Note: Please order the coupling counterpart LT 5.25 on reactor side separately
Content 1 Stück
Preis auf Anfrage
Order No.: 2189012
Manufacturer Art. No.: 0020000880
IKA WH10 - WiCo holder Wall mount for wireless controller
Content 1 Stück
Preis auf Anfrage
Order No.: 2189013
Manufacturer Art. No.: 0020000984
IKA LT 5.21 - High-temperature hose kit, PTFE, Ø13 mm, 2 x 1.5 m, M16x1 High-temperature hose set DN 13 (2 x 1,5 m) Material: PTFE, high quality insulated Temperature range: -30 - 260 °C Max. operating pressure: 6 bar Connection: Tube connector with M16x1 union nuts ⌀ inner: 13 mm; ⌀ outer: 38 mm Chemical Resistance: water; silicon oils; ethylene glycol; mineral oil; ethanol
Content 1 Stück
Preis auf Anfrage
Order No.: 2189014
Manufacturer Art. No.: 0020000988
IKA MT 40.100 - Disposable grinding chamber, 40 ml, 100 pcs. The disposable grinding chamber with a stainless steel beater reduces soft, medium, hard and brittle materials with a Mohs hardness of up to 5 (manganese or apatite: 5 Mohs). The chamber is made of transparent plastic so grinding tests can be observed at any time Useful volume: 40 ml Quantity: 100 pieces/pack Material grinding chamber: PP
Content 1 Stück
Preis auf Anfrage
Order No.: 2189015
Manufacturer Art. No.: 0020001173
IKA MTC40/100.100 - Cover for disposable grinding chamber, 100 pcs. Cover 100 pieces
Content 1 Stück
Preis auf Anfrage
Order No.: 2189016
Manufacturer Art. No.: 0020001182
IKA S 50 N - G 45 G - ST - Dispersing element, saw- tooth, Ø45 mm Suitable for dispersing instrument T 50 digital ST tools are recommended for use with tissue and other fibrous materials Working range: 0,5 - 20 l Stator diameter: 45 mm Immersion depth: 70 - 250 mm Materials in contact with medium: PTFE, AISI 316L Suitable for solvents: yes Max. temperature: 180 °C Sterilization methods: all methods
Content 1 Stück
Preis auf Anfrage
Order No.: 2188705
Manufacturer Art. No.: 0008039500
IKA C 26 - Prep stand Enables a quick and more efficient sample preparation process when loading the C 5010 and C 5012 decomposition vessels. The lid of the decomposition vessel containing the electrodes and crucible holder is fastened with a clamp. This allows the user the freedom to use both hands while feeding the cotton thread through the electrode and into the crucible.
Content 1 Stück
Preis auf Anfrage
Order No.: 2188723
Manufacturer Art. No.: 0008804000